欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
电镀锌螺栓摩擦系数影响因素的实验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

校企合作科研基金项目( 01W10-911-010-OROB)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对目前电镀锌螺栓扭矩系数散差大,不利于预紧力控制的问题,基于单因素方差分析理论,通过对不同 螺栓强度等级、镀层厚度、钝化层、支撑面硬度的镀锌螺栓进行拧紧实验,找出影响螺栓摩擦因数的关键因素,发现D 级钝化层螺栓比C级能承受更大轴向力,可以有效提高螺栓效能。对影响螺栓摩擦因数的关键因素进行控制,通过对 控制前后实验数据的对比,发现控制后能有效地减少螺栓扭矩系数的散差,提高镀锌螺栓连接的可靠性。

    Abstract:

    For the problem of big dispersion of nut factor,which is unfavorable for pre tightening force control,based on the one way analysis of variance theory,through the tighten experiments on different strength grade,coating thickness,rotational speed,bolt chromate treatment,bearing surface hardness of the bolts,the key factors affecting bolt friction coefficient were found out.It is shown that D chromate treatment bolts can effectively improve the tighten bolt axial force and give full play to the bolts using efficiency.Through control the key factors affecting bolt friction coefficient,the dispersion of nut factor is effectively reduced and the reliability of connector is improved.

    参考文献
    相似文献
    引证文献
引用本文

刘传波,涂徳先.电镀锌螺栓摩擦系数影响因素的实验研究[J].润滑与密封,2014,39(3):38-42.
.[J]. Lubrication Engineering,2014,39(3):38-42.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-11-25
  • 出版日期: