欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
几何参数对直通式斜齿封严泄漏特性影响数值分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金项目(NZ2012102).


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    改变直通式斜齿封严的7个主要的几何参数(封严间隙、齿高、齿距、齿宽、齿数、前倾角、后倾角),建立27个模型,通过数值模拟计算,研究气动参数(进出口落压比)及主要几何参数对其泄漏特性的影响规律。结果表明,斜齿封严的流量系数随着落压比和封严间隙、齿高、齿宽的增大而增大,随着齿距、齿数的增大而减小;前、后倾角对斜齿封严的流量系数有较为明显的影响,随着前倾角的增大流量系数先减小后增大,而随后倾角的增大流量系数单调减小。这是因为斜齿齿腔壁面出现局部涡旋,且随着后倾角增大涡旋区域增大,齿内流动耗散增强,因而流量系数减小。

    Abstract:

    The 27 models of straight oblique labyrinth seals were set up by changing the geometry parameters of straight-through oblique labyrinth seals,including the seal clearance,fin height,fin pitch,fin tip thickness,fin number,fin front inclined angle and rear inclined angle .The influences of the drop pressure ratio of import and export and the geometry parameters of straight-through oblique labyrinth seals on sealing characteristics were numerical investigations.The results show that the discharge coefficient of oblique labyrinth seals is increased along with the increasing of the drop pressure ratio,the seal clearance,fin height and fin tip thickness,and it is decreased along with the increasing of fin pitch and fin number.The discharge coefficient is greatly influenced by fin front inclined angle and rear inclined angle,which is firstly decreased and then increased along with the increasing of the fin front inclined angle,and decreased along with the increasing of the rear inclined angle.This is because there is a small swirl in the cavity,which is strengthened with the increasing of the rear inclined angle,so the dissipation of energy is increased and the discharge coefficient is decreased

    参考文献
    相似文献
    引证文献
引用本文

李文凯,张 勃,吉洪湖,杜发青,刘红梅,陆海鹰,邓明春.几何参数对直通式斜齿封严泄漏特性影响数值分析[J].润滑与密封,2014,39(5):17-22.
.[J]. Lubrication Engineering,2014,39(5):17-22.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-11-25
  • 出版日期: