欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
滑环式蓄能密封环结构的有限元优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国运载火箭技术研究院创新基金项目.


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用 ANSYS13.0建立某滑环式复合蓄能密封环的有限元模型,分析该密封环在给定工况下密封性能,并与单纯的滑环密封环的密封性能进行比较;分析滑环几何参数对其结构受力情况及密封性能的影响,对密封环结构进行优化设计。结果表明:通过对滑环的顶部宽度、壁面宽度、唇面半径、滑环高度等几何参数的优化,改善了结构在工作环境下的受力状况,提高了其工作寿命,同时使其能够更可靠地保证密封性能。

    Abstract:

    The finite element model of an energy-storage slipping sealing ring was established by taking advantage of ANSYS 13.0.The sealing performance of this sealing ring was analyzed in a given working condition, and was compared with that of simple slipping sealing rings. The effect of the geometric parameters of the slipping ring on the sealing performance and stress condition of the structure was analyzed, and the slipping ring structure was redesigned. The results show that, through optimizing the geometric parameters of the slipping ring, such as the top width, the wall width, the labial radius and the slip ring height of the slipping ring, the stress condition of the slipping ring structure in the working environment is improved, the service life is increased and the sealing performance is guaranteed.

    参考文献
    相似文献
    引证文献
引用本文

田 乾,王立峰,李 凡,吴福迪,赵云峰.滑环式蓄能密封环结构的有限元优化设计[J].润滑与密封,2014,39(10):128-132.
.[J]. Lubrication Engineering,2014,39(10):128-132.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-04-21
  • 出版日期: