欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
钛基润滑脂的制备工艺研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以钛酸四异丙酯、硬脂酸和极性溶剂为原料制备钛基润滑脂,考察基础油和有机酸种类、配比和工艺对钛基脂性能的影响。结果表明:不同种类的有机酸对成脂影响很大,钛皂对不同基础油的稠化能力也不同;以硬脂酸为有机酸、石蜡基油为基础油,最高炼制温度为180~200 ℃,冷却方式为慢冷时,制得的钛基脂的综合性能较好,其滴点约280 ℃,远高于一般单皂基润滑脂。红外光谱分析结果表明,该制备工艺形成了钛皂,同时避免了残酸问题。

    Abstract:

    Titanium greases were prepared by using titanium isopropoxide, organic acid and polar solvent as raw materials. The effects of the type of organic acids and base oils, the composition and the process condition on the properties of titanium greases were discussed. The results show that organic acids have large influence on the preparation of titanium greases, and the thickening ability is different for titanium soap on different base oils. By using stearic acid as organic acid and paraffine base oil as base oil, and selecting the highest refining temperature of 180 to 200 ℃ and the slow cooling method, the prepared grease has good comprehensive properties, its drop point is about 280 ℃, which is higher than the general greases thickened by other single soaps. The infrared spectrum analysis result shows that the titanium soap is formed by using this process, and the problem of residual acid is avoid.

    参考文献
    相似文献
    引证文献
引用本文

郭婉晴,郭小川,宋 辉,王 晶.钛基润滑脂的制备工艺研究[J].润滑与密封,2015,40(4):69-73.
.[J]. Lubrication Engineering,2015,40(4):69-73.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: