欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
固化剂对黏结润滑涂层摩擦学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以环氧树脂为胶黏剂,聚四氟乙烯、石墨、二硫化钼为固体润滑剂,采用二氨基咪唑三嗪络合物(HT110)和二氨基二苯砜(DDS)2种不同的固化剂制备黏结固体润滑涂层,并在HDM-20端面摩擦磨损试验机上考察2种黏结固体润滑涂层在干摩擦条件下的摩擦磨损性能。结果表明:使用HT110固化剂可以获得更合适的表面组织结构,使黏结固体润滑涂层具有更好的减摩性,更高的耐负荷极压性;固化剂含量对涂层性能的影响显著,当HT110固化剂质量分数为6%~8%时,黏结润滑涂层的摩擦因数最低,具有最好的耐磨和高承载性能。

    Abstract:

    Two kinds bonded solid lubricant coatings was prepared by using an epoxy resin mixed with two different curing agent, Diamino triazine complex imidazole(HT110)and Diaminodiphenyl sulfone(DDS),and adding the same content polytetrafluoroethylene, graphite, molybdenum disulfide as solid lubricant.The tribological properties of the bonded solid lubricant coatings were tested by HDM20 tribometer. The experimental results show that the bonded lubricant coating with HT110 curing agent has suitable surface structure, lower antifriction and higher load resistance.The curing agent has a significant effect to coatings,the bonded solid lubricant coating with HT110 of 6%-8% has the lowest friction coefficient,and the best performances of antiwear and high load capacity.

    参考文献
    相似文献
    引证文献
引用本文

吴险峰,焦明华,王世成,田 明,尹延国.固化剂对黏结润滑涂层摩擦学性能的影响[J].润滑与密封,2015,40(11):124-128.
.[J]. Lubrication Engineering,2015,40(11):124-128.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-08
  • 出版日期: