欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
冲压油模拟拉深试验方法的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research on Testing Method of Punching Oil Property by Simulating Tensile Test
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立冲压油性能模拟拉伸试验装置,提出冲压拉伸油拉伸性能的评定指标,包括最大拉伸力、极限拉伸比和坯料未拉破时最大单位压边力,并建立相应的评价方法。采用该评价方法对几种试验油样进行重复性和区分性试验。结果表明,该评价方法可用于评定石油基冲压拉伸油的拉伸性能,且试验方法有着良好的重复性和区分性。

    Abstract:

    A simulating tensile testing equipment for punching oil property was installed.The evaluation index was presented to evaluate the tensile property of punching oils,including maximum tensile strength,extreme extension ratio and maximum unit blankholder force at mould material without stretched broken,and the corresponding evaluation method was established.Repeatability and differentiation tests were carried out on several kinds of oil samples by using this method.The results show that this method can evaluate the tensile property of the petroleum base punching oils,and it has good repeatability and obvious difference for metal punching oils with different qualities.

    参考文献
    相似文献
    引证文献
引用本文

杨传富,张杰,朴吉成,李世春,周立鑫,梁德君.冲压油模拟拉深试验方法的研究[J].润滑与密封,2016,41(9):139-143.
YANG Chuanfu, ZHANG Jie, PIAO Jicheng, LI Shichun, ZHOU Lixin, LIANG Dejun. Research on Testing Method of Punching Oil Property by Simulating Tensile Test[J]. Lubrication Engineering,2016,41(9):139-143.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-01-03
  • 出版日期: