In order to improve the fretting wear behavior of Inconel690 alloy,WC10Co4Cr and CoCrW coatings were prepared on the surface of Inconel690 alloy by using High Velocity OxyFuel(HVOF) spraying technique.The fretting wear behavior of the coatings was investigated on the PLINT fretting wear tester.The experimental results show that when the normal load unchanged,with the displacement amplitude increasing,the friction coefficient of the coatings becomes large.Under the same experimental conditions,the steady friction coefficient of WC10Co4Cr and CoCrW coatings is less than that of Inconel690 alloy,the wear resistance of them is significantly better than that of Inconel690 alloy,and WC10Co4Cr coating is slightly better than CoCrW in the wear resistance.A lot of flaking pits and delamination are showed up on the worn surface of these two coatings according to surface morphological analysis.The main wear damage mechanism of coatings is abrasive wear and delamination.