文章摘要
郭永信,卞达,赵永武.考虑摩擦切向力的弹塑性粗糙表面接触模型[J].润滑与密封,2017,42(8):14-19
考虑摩擦切向力的弹塑性粗糙表面接触模型
An Elastic plastic Model Considering Frictional Tangential Stress for the Contact of Rough Surfaces
  
DOI:10.3969/j.issn.0254-0150.2017.08.003
中文关键词: 粗糙面  摩擦切向力  接触面积  接触模型
英文关键词: rough surface  frictional tangential stress  contact area  contact model
基金项目:国家自然科学基金项目(51675232);中央高校基本科研业务费专项资金项目(JUDCF13028);江苏省博士后科学基金项目(1002028C);中国博士后科学基金项目(20110491366).
作者单位E-mail
郭永信 江南大学机械工程学院 gyxjiangnan@gmail.com 
卞达   
赵永武   
摘要点击次数: 34
全文下载次数: 
中文摘要:
      基于接触微凸体由弹性变形向弹塑性变形及最终向完全塑性变形的转化皆是连续和光滑的假设,提出一种综合考虑弹塑性变形以及摩擦切向力等因素的新型粗糙表面接触模型。通过分析不同塑性指数以及载荷条件下该模型与ZMC模型以及GW模型预测。结果发现:在低塑性指数、小法向接触载荷情况下,该模型预测的真实接触面积相比ZMC模型偏小,甚至比GW模型预测的真实接触面积偏小,但是随着法向接触载荷的增加,该模型预测的真实接触面积逐渐增大,并超过ZMC模型以及GW模型预测结果;在高塑性指数下,该模型预测的真实接触面积即使在小法向接触载荷情况下也相比ZMC模型以及GW模型预测的真实接触面积大,且随着载荷的增加,真实面积之间的差距也逐渐增大;随着塑性指数的增加,该模型预测的真实面积超过GW模型以及ZMC模型预测值的临界载荷逐渐减小。
英文摘要:
      Based on the assumption that the transitions from elastic,through elastic plastic,to fully plastic deformation of a contacting asperity is continuous and smooth,a novel elastic plastic contact model considering the effect of frictional tangential stress was presented.Compared with ZMC and GW models,it is found that the real contact area predicted by the present model is smaller than that predicted by ZMC and GW models at the low plasticity index and contact load.However with the increase of contact load,the real contact area predicted by the present model becomes larger than that predicted by ZMC and GW models.At high plasticity index,the real contact area predicted by the present model is larger than that predicted by ZMC and GW models even at low contact load.The difference of the predicted results based on the three models is increased with the increase of the contact load.The critical contact load that the real contact area predicted by the present model exceeds that predicted by ZMC and GW models is decreased with the increase of plasticity index.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮