欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
铝合金加工用水基切削液润滑性能的影响因素
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


The Factors Influencing the Lubricating Properties of Water Based Cutting Fluid for Aluminum Alloy Processing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用攻丝扭矩实验方法研究铝合金加工用水基切削液润滑性能的影响因素。实验结果表明,稀释液pH值、乳液粒径对润滑性能的影响最为显著,基础油含量、润滑添加剂种类及含量等亦有明显影响;稀释液pH值越低、乳液粒径越大、基础油和合成酯含量越高,润滑性能越好;三羟甲基丙烷油酸酯、乙氧基化聚合酯、氯化石蜡、硫化脂肪酸酯等均为有效的铝合金加工润滑添加剂,但硫化烯烃润滑性能较差。

    Abstract:

    The main factors influencing the lubricating properties of waterbased cutting fluid for aluminum alloy processing were studied by the tapping torque test.The results show that pH value of the diluent and the emulsion particle size have the most significant influence on the lubricating properties,and the content of base oil,the types and content of lubricating additives also have obvious effect on the lubricating properties.Furthermore,the diluent with lower pH value,larger particle size,higher content of base oil and synthetic ester presents excellent lubricating properties.The trimethylolpropane,ethoxylated polymeric esters,chlorinated paraffin and sulfurized fatty acid ester are efficient additives of aluminum alloy processing,while sulfurized olefin has poor lubrication property.

    参考文献
    相似文献
    引证文献
引用本文

李涛.铝合金加工用水基切削液润滑性能的影响因素[J].润滑与密封,2018,43(3):136-140.
. The Factors Influencing the Lubricating Properties of Water Based Cutting Fluid for Aluminum Alloy Processing[J]. Lubrication Engineering,2018,43(3):136-140.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-04-24
  • 出版日期: