欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
石蜡基和环烷基基础油复配乳化切削液性能研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以不同黏度石蜡基和环烷基复配基础油调和一系列乳化液,分别通过电导率法、马尔文颗粒度法考察乳化液的稳定性,采用Micro Tap G-8攻丝扭矩试验考察乳化液的切削加工性能。研究结果表明,采用石蜡基和环烷基复配的黏度为20 mm2/s基础油所制备的乳化液的稳定性最佳,且有色金属切削加工性能突出。

    Abstract:

    The series of emulsion were prepared from different viscosity of paraffin and naphthenic of complex base oils. The stability of the emulsion was investigated by the conductivity method and the Malvern laser particle analyzer, and the machinability was investigated by Micro Tap G-8 tapping torque (Micro Tap). The results show that the emulsion synthesized from paraffin and naphthenic of complex base oils with viscosity of 20 mm2/s has good stability and excellent machinability of non ferrous metals.

    参考文献
    相似文献
    引证文献
引用本文

尤龙刚,鲁 倩,陈志忠,于 海.石蜡基和环烷基基础油复配乳化切削液性能研究[J].润滑与密封,2014,39(8):119-122.
.[J]. Lubrication Engineering,2014,39(8):119-122.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-11-25
  • 出版日期: