欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
C-2501火炬机导向环磨损故障分析及改造
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对C-2501火炬机存在的刮油环损坏、活塞和缸套磨损及导向环磨损等故障,通过故障分析和参数计算,提出适当增大导向环外径尺寸的方法,并对火炬机导向环外径进行改造。改造后,延长了火炬机的运转周期,降低了设备故障率。

    Abstract:

    Aimed at some faults such as worn guiding ring,worn piston and cylinder liner,damaged oil scraping ring in the C-2501 torch machine,through fault analysis and parameters calculation,the method of suitably increasing the guiding ring diameter was proposed,and the guiding ring diameter was reformed.After reform,the operation period of the machine is extended,and the equipment fault rate is reduced.

    参考文献
    相似文献
    引证文献
引用本文

王玥玮,陈 翔,陈孝辉. C-2501火炬机导向环磨损故障分析及改造[J].润滑与密封,2015,40(6):129-132.
.[J]. Lubrication Engineering,2015,40(6):129-132.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: