欢迎访问润滑与密封官方网站!

咨询热线:020-32385313 32385312 RSS EMAIL-ALERT
采用步进式干油阀的智能干油集中润滑系统研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(51375285)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出以步进式干油阀为给油器的智能干油集中润滑系统方案,介绍系统主站PLC的接线方式以及触摸屏的组态程序,并说明步进式干油阀的机械结构。在分析干油集中润滑系统的工艺要求和步进电机控制特性的基础上,提出一个驱动器驱动多个步进电机的驱动方案,并研究硬件的隔离电路。实际应用表明,采用步进式干油阀作为给油器大大降低干油集中润滑系统的故障率;在智能干油集中润滑系统中使用一台驱动器驱动多个步进电机的方式,不仅降低了系统成本,还减少了系统的复杂性。

    Abstract:

    A scheme of intelligent centralized grease lubrication system using stepper motor valve as oil feeder was presented.The connection of main PLC and the configuration program of HMI were introduced,and the mechanical structure of stepper motor valve was illustrated.A scheme that more than one stepper motor is driven by only one driver was designed based on the technological requirements of centralized grease lubrication system and the control characteristic of stepper motor.The isolation circuit of the hardware was also researched.The actual application shows that the fault of the centralized grease lubrication system is reduced by using the stepper motor valve as the oil feeder.By using one driver to drive more than one stepper motor in intelligent grease lubrication system,the cost of the system is reduced, and the complexity of the system is decreased.

    参考文献
    相似文献
    引证文献
引用本文

赵玉刚,刘新玉,王占军,赵 润,宋严科.采用步进式干油阀的智能干油集中润滑系统研究[J].润滑与密封,2015,40(10):92-96.
.[J]. Lubrication Engineering,2015,40(10):92-96.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-01-08
  • 出版日期: