Abstract:Viscosity is an important physical parameter of waterbased drawing oil.The production of different stamping steel needs different viscosity of drawing oil,so it is necessary to establish a model to control the viscosity of drawing oil.Waterbased oil is a mixture of Newtonian fluid and nonNewtonian fluid.In order to establish a model that can be used to predict the viscosity of the mixed system,waterbased drawing oil samples with different proportions were prepared and their viscosity at different temperatures was tested.Bingham model,Cragoe model,Arrhenius model,Kendall-Monroe model and ASTM two parameter model were used to predict the viscosity of waterbased drawing oil.It is found that ASTM two parameter model is more accurate to predict the viscosity of waterbased drawing oil.In order to improve the prediction accuracy of ASTM two parameter model,considering the influence of waterbased drawing oil composition ratio,the ASTM model was modified.The modified model is more suitable for viscosity prediction of mixed system containing Newtonian fluid and non Newtonian fluid.