Home
Pass lssues
Submission
Peer Review
Publication Ethics and Malpractice
Contact Us
About Journal
Instruction for Authors
Editoral Office
Editorial Board
Copyright Transfer Agreement
In the current directory
Network pre-publication
Select All
Deselect
Combined selection
表面织构对角接触球轴承润滑性能的影响*
Effect of Surface Texture on Lubrication Performance of Angular Contact Ball Bearings
王保民,吴艳,闫瑞祥,房文博
2023 Vol.48(5):1-6
[摘要]
(39)
[PDF]
()
大偏心下滑动轴承热弹流润滑状态及特性*
Thermoelastohydrodynamic Lubrication State and Characteristics of Journal Bearing under Large Eccentricity Condition
鲍建桥,郭红,李瑞珍,张绍林
2023 Vol.48(5):7-15
[摘要]
(26)
[PDF]
()
压裂泵滑动轴承流体动压润滑性能研究*
Study on Hydrodynamic Lubrication Performance of Sliding Bearing of Fracturing Pump
王安帅,于学会,曾兴昌,周小明,杨雷宇
2023 Vol.48(5):16-22
[摘要]
(20)
[PDF]
()
不同介质下ER8车轮钢滑动摩擦磨损性能*
Sliding Friction and Wear Performance of ER8 Wheel Steel in Different Media
杨文斌,夏金龙,肖乾,陈道云
2023 Vol.48(5):23-28
[摘要]
(13)
[PDF]
()
氧化石墨烯添加剂对基础油成膜特性的影响*
Effect of Graphene Oxide as an Additive on the Film Forming Characteristics of Base Oil
孙文东,刘晓玲,张翔,郭峰
2023 Vol.48(5):29-35
[摘要]
(19)
[PDF]
()
高分子聚合物材料微动摩擦磨损行为*
Fretting Friction and Wear Behavior of Polymer Composites
金屿,吕晓仁,张兆想,郭飞
2023 Vol.48(5):36-41
[摘要]
(15)
[PDF]
()
界面极限滑移条件下的液膜密封流场平均速度分布规律*
Average Velocity Distribution of Liquid Film Seal Flow Field under Boundary Limit Slip Conditions
曹志康,胡琼,卢迪,肖洋,陈阳,王衍,黄茜茜,陆雨佳
2023 Vol.48(5):42-51
[摘要]
(5)
[PDF]
()
基于Carreau流变模型的圆柱滚子轴承热混合润滑分析*
Analysis of Thermal Mixed Lubrication of Cylindrical Roller Bearings Based on Carreau Rheological Model
何文卓,刘晓玲,朱鹏娟,周亚林
2023 Vol.48(5):52-59
[摘要]
(9)
[PDF]
()
豆浆粉溶液的流变性能和润滑性能研究*
Rheological and Lubrication Properties of Soybean Milk Powder Solution
丁宗如,钱善华,王亮,马德珂,卞达
2023 Vol.48(5):60-67
[摘要]
(4)
[PDF]
()
油孔数量对浮环轴承润滑特性的影响*
Influence of Number of Oil Holes on Lubrication Characteristics of Floating Ring Bearings
刘泽中,宾光富,钟新利,杨峰
2023 Vol.48(5):68-73
[摘要]
(6)
[PDF]
()
柔性支承结构对可倾瓦轴承稳定性的影响*
Influence of Flexible Support Structure on Stability of Tilting Pad Bearing
秦鑫,王小静,黄光耀,邱正茂
2023 Vol.48(5):74-78
[摘要]
(8)
[PDF]
()
用于光学玻璃CMP的高效稀土抛光液研究*
Research on High-Efficiency Rare Earth Polishing Slurry for CMP of Optical Glass
王也,张保国,吴鹏飞,谢孟晨,李烨,李浩然
2023 Vol.48(5):79-84
[摘要]
(5)
[PDF]
()
基于质子交换膜的气动软体驱动器的自密封结构*
A Self-sealing Structure for Soft Pneumatic Actuators Based on Proton Exchange Membrane
徐瑶,王挺,王志东
2023 Vol.48(5):85-94
[摘要]
(8)
[PDF]
()
7075铝合金和QRO90模具钢在热成形工况下的摩擦磨损行为*
Friction and Wear Behavior of 7075 Aluminum Alloy and QRO90 Tool Steel During Hot Stamping
邓亮,徐冰倩
2023 Vol.48(5):95-102
[摘要]
(5)
[PDF]
()
不同气腔结构径向静压空气轴承性能对比*
Performance Comparison of Radial Aerostatic Bearings with Different Air Cavity Structures
刘通,董志强
2023 Vol.48(5):103-109
[摘要]
(6)
[PDF]
()
氟化石墨烯作为聚脲润滑脂添加剂的摩擦学性能*
Tribological Properties of Fluorographene as an Additive in Polyurea Grease
熊红旗,卢鹏,向硕,廖游山,杨鑫,何燕,李亮
2023 Vol.48(5):110-116
[摘要]
(13)
[PDF]
()
内燃机轴承失圆对润滑特性的影响
Influence of Out-of-Roundness of Bearing on Lubrication Performance of Main Bearings of Internal Combustion Engine
兰银在,王根全,景国玺,程颖,文洋,张忠伟,周润天,王晓滕
2023 Vol.48(5):117-122
[摘要]
(9)
[PDF]
()
表面波度对泵用液体圆孔端面密封泄漏特性的影响
Effects of Surface Waviness on Leakage Characteristics of Liquid Circle-Dimples Face Seal for Pumps
顾广溪,宋源森,白少先
2023 Vol.48(5):123-129
[摘要]
(8)
[PDF]
()
2.25Cr1Mo传热管切向微动磨损性能研究
Study on Tangential Fretting Abrasion Performance of 2.25Cr1Mo Heat Transfer Tubes
邢帅,王立闻,杨凌云,武志广,王博,官雪梅,刘标,蔡振兵
2023 Vol.48(5):130-136
[摘要]
(11)
[PDF]
()
基于yolov5在线可视铁谱图像磨粒多目标识别方法研究*
Research on Multi-target Recognition Method of Wear Debris Based on Yolov5 Online Visible Ferrography Image
何铭亮,王建国,范斌,张超,郭向阳
2023 Vol.48(5):137-142
[摘要]
(7)
[PDF]
()
考虑温度时油封运行工况参数对其可靠性的影响*
Influence of Operating Condition Parameters on the Reliability of Oil Seals Considering Temperature
张付英,韩兆,高勇新,刘元刚
2023 Vol.48(5):143-149
[摘要]
(10)
[PDF]
()
控制棒水压驱动机构水压缸碳化钨涂层工艺优化研究
Investigation of Tungsten Carbide Coating Process Optimization for Hydraulic Cylinder of Control Rod Hydraulic Drive Mechanism
陈宝,石勇,薄涵亮
2023 Vol.48(5):150-156
[摘要]
(8)
[PDF]
()
工况对盾构机主驱动轴承润滑特性的影响*
Influence of Working Conditions on Lubrication Characteristics of Main Drive Bearing of Shield Machine
梁志鹏,程永龙,苏建新
2023 Vol.48(5):157-163
[摘要]
(11)
[PDF]
()
环保长效切削液技术研究与集成应用*
Research and Integrated Application of Environmental Friendly Long-term Cutting Fluid
戴恩期,孔伟伟,熊红旗,张鹏
2023 Vol.48(5):164-172
[摘要]
(9)
[PDF]
()
航空发动机润滑油喷嘴性能优化分析*
Performance Optimization Analysis of Lubricating Oil Nozzle in Aeroengine
吴超琦,王军,占锐,沈洁阳,李昱瑶,尉玉
2023 Vol.48(5):173-178
[摘要]
(12)
[PDF]
()
动车组齿轮箱润滑油更换周期优化*
Optimization of Lubricant Replacement Cycle for Gearbox of Electric Multiple Units
姜陈,傅双波,高原
2023 Vol.48(5):179-184
[摘要]
(7)
[PDF]
()
Curent Issue
2021,Volume 46
No 5
15 May 2021
Featured Articles
State of The Arts on Aging and Tribological Properties of Rubber like Materials in Liquid Medium
彭旭东
2018 Vol.43(3):1-10
[PDF]
()
Contact Analysis of Abrasive Wear
张勇强
2018 Vol.43(3):11-16
[PDF]
()
Effects of Pulse Bias Voltages on Structure and Property of DLC Films Prepared by PECVD Technique
陈国富
2018 Vol.43(3):17-22
[PDF]
()
Most Cited
Most Read
Most Download
分享按钮